Sensoray 2411 Manuel d'utilisateur télécharger pdf (Page 2)

I. Introduction:

The Sensoray model 2411 stack consists of a Sensoray Model 301 CPU board, one/two Sensoray

Model 311 frame grabber board(s), a Sensoray Model 207 power supply board, an optional Sensoray

Model 340 PCMCIA adaptor or Model 300TA IDE adaptor board, and an embedded Linux operating

system installed on a solid state disk.

As a summary, following 2411 configurations can be chosen:

2411-1: 301+311(s)+207

basic configuration, without big storage; the captured frames can be stored in

SDRAM on 301, and/or transferred over Ethernet via FTP or UDP apps.

2411-2: 301+311(s)+340+207

with PCMCIA type of storage, like CF (Compact Flash) or MD (MicroDrive) plus

PCMCIA adapter, or removable PCMCIA HD (Hard Drive); the captured frames

can be stored on such PC card type of storage, and/or transferred over Ethernet

via FTP or UDP apps.

As an alternative and unreleased configuration, the captured frames can be

stored on a USB HD (Hard Drive) through one of USB1.1 ports on 340.

2411-3: 301+311(s)+300TA+207

with IDE HD (Hard drive) storage; the captured frames can be stored on an IDE

type of HD, and/or transferred over Ethernet via FTP or UDP apps.

2411-4: 301+311(s)+ 300TA+340+207

with IDE HD storage and PC-card type of storage or USB HD; the captured

frames can be stored on a CF/MD and HD, and/or transferred over Ethernet via

FTP or UDP apps.

1 2 3 4 5 6 7 ... 10 11

Pas de commentaire

Sensoray 2411 Manuel d'utilisateur Page 2