Sensoray 812 Manuel d'utilisateur

PCI Express 8-Channel Frame Grabber User’s Manual Model 812 | Rev.1.0.1 | November 2014

10 Audio Input Connectors, DB15: J2 Pin Signal Pin Signal Pin Signal 1 Audio In-2 6 Audio In-8 11 * 2 Audio In-3 7 Audio In-7 12 * 3 Audio In-4 8

11 DIP Switches Digital I/O Configuration DIP Switch: SW1 The DIP switch SW1 is used for configuring Digital I/O routing. Refer to the table below

12 ON ON ON ON Route internal GP16~GP23 on the TW6869 as the GPIO1~GPIO8; Connect them to the TB1~TB8 and J3 (34-pin) connector LED Power-OK indica

13 Software Device Driver and SDK Device driver and SDK including driver API & demo application programs are available for both Windows and Linu

14 a well-known and highly recommended OSS that can be used for A/V (Video or Audio) capturing, using 812. Sensoray Company provides an application n

15 Specifications Video Formats NTSC, PAL, SECAM Video Inputs 8 input channels, simultaneously: 8 Composite video, via DB15 connector, 75 Oh

16 Appendix Appendix A: Cable 812C1  812 A/V Break-in Connector Mapping Since currently supplied Cable 812C1 (DB15-to-BNC adapting cable for Mode

Table of Contents TABLE OF CONTENTS ... 2 LIMITED WARRAN

3 Limited warranty Sensoray Company, Incorporated (Sensoray) warrants the hardware to be free from defects in material and workmanship and perform to

4 Special handling instructions The circuit board contains CMOS circuitry that is sensitive to Electrostatic Discharge (ESD). Special care should b

5 Introduction Model 812 is a PCI-Express version of 8-channel frame/video capture device designed for the applications requiring high capture rate f

6 Feature Summary  PCI-Express Video/Audio Capture  Video input: 8 individual input video channels (Composite)  Audio input: 8 mono (mo

7 Reference Board Picture and Connector Layout

8 Connector List P1 PCI-Express Connector J1 DB15: Composite Video Input for Channel-1 to 8 J2 DB15: Audio Input for 8 mono Channel-1 to 8 J3 34

9 Connector Pin & Signal Definitions PCI-Express Bus Connector: P1 Pin – Side B Signal Pin – Side A Signal B1 +12V A1 PRSNT#1 B2 +12V A2 +12V