Sensoray 518 Manuel d'utilisateur télécharger pdf (Page 31)

High Speed Mode

This command increases the channel scan rate to allow higher throughput. The default channel

processing time is decreased from 22 milliseconds/channel to 13 milliseconds/channel. The

increased scan rate reduces accuracy by approximately fifty percent and will cause some boards

to exhibit slightly increased noise levels.

A board reset (hard or soft) will always restore the board to the default scan rate. A board reset is

the only way to resume the default scan rate after invoking the High Speed Mode command.

COMMAND: (240), (8), (0)

RESPONSE: NONE

EXAMPLE:

‘ This code fragment switches the 518 to High Speed Mode.

CALL Send518byte (BasePort%, 240)

CALL Send518byte (BasePort%, 8)

CALL Send518byte (BasePort%, 0)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 56 57

Pas de commentaire

Sensoray 518 Manuel d'utilisateur Page 31