Sensoray 616 Manuel d'utilisateur télécharger pdf (Page 7)

5. Connectors

The BNC connectors (if installed) are for composite video. J1 is composite video in and J7 is composite

video out. The center pin is the signal and the out shell is video ground.

The P1 connector carries S-Video input signals. The pinout is given in Table 1.

Pin Function Pin Function

1 S-Video in – C 3 Video ground

2 S-Video in – Y 4 Video ground

Table 1. P1 Connector Pinout

Note: the net “S-Video in – C” connected on the board to the composite video input.

The P2 connector carries S-Video output signals. The pinout is given in Table 2.

Pin Function Pin Function

1 S-Video out – Y 3 Video ground

2 S-Video out – C 4 Video ground

Table 2. P2 Connector Pinout

Figure 2. I/O Diagram

1 2 3 4 5 6 7 8

Pas de commentaire

Sensoray 616 Manuel d'utilisateur Page 7